Using The Washing Cap - Hitachi AJ-S55KXP User Manual

Using the Washing Cap

Make sure the washing cap is used in "WOOL" or "BLANKET" process. The washing cap is the optional part.
Installation of the washing cap
Bend the cap as is shown in the figure and then
1
put it in the washing basket with the side with
letter faced up.
washing cap
Fit the concave of the
washing cap into the
convexity of the basket
and flatten it up.
Attention
• Please install the washing cap in right way to avoid unnecessary injury.
Adjustment of the position and height of the washing cap
In "WOOL" process
• The installation position (height) of the washing cap shall be determined by the type, size, and thickness of
the washings. Please install the washing cap at a height where it could press against the washings slightly.
( )
• There is a sign of protrusion on the interior wall of the basket, indicating where the installation position shall
be, which can be used as reference at the time of installation.
• For light and thin clothes such as blouse, towels can be put into the basket to adjust the height of the
washings and avoid oblique of the washing.
washing cap
Attention
• Do not add any clothes on the washing cap after the installation of the cover.
1Press the washing cap on your side, squeeze
2
the whole cap into the basket.
2Press hard the whole washing cap down and
flatten it up.
Push down the
whole cover
Washing waterline washing capacity
less than 1.2kg
30L 25L
1.2kg
Push down the cover
close to your body.
33