Brother DCP-9055CDN Basic User's Manual page 21

c
Put paper in the MP tray and make sure:
 The paper stays under the maximum
paper mark (1).
 The paper edge is positioned
between the arrows (2).
 The side to be printed on must be
face up with the leading edge (top of
the paper) in first.
1
Note
When you are using glossy paper, put only
one sheet at a time in the MP tray to avoid
a paper jam.
d
Lift up the support flap to prevent paper
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.
Printing on envelopes and thick paper
from the MP tray
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
2
Loading paper
2
2
13