Auto Registration; Manual Registration; Frequency (Color Correction) - Brother DCP-9055CDN Basic User's Manual

• If you print using the Macintosh printer
driver, you need to perform the calibration
using the Status Monitor. After turning
the Status Monitor on, choose Color
Calibration from the Control menu. (See
Status Monitor in the Software User's
Guide. When the StatusMonitor is open,
choose Control / Color Calibration from
the menu bar.)

Auto Registration

Registration
If solid areas of color or images have cyan,
magenta or yellow fringes, you can use the
auto-registration feature to correct the
problem.
a
Press Menu, 3, 7.
b
To start, press 1.
To exit, press 2.
c
Press Stop/Exit.

Manual Registration

If color still appears incorrectly after auto-
registration, you will need to perform manual
registration.
a
Press Menu, 3, 8, 1.
b
Press Mono Start or Color Start to
start printing the color registration chart.
c
When the machine has finished printing
the registration chart, press 2
(Set Regist.) to correct the color
manually.
d
Starting at 1 (1 Magenta Left) on the
chart, check which colored bar has the
most uniform print density and enter its
number into the machine using the
a and b keys.
Press OK.
Repeat for 2 (2 Cyan Left), 3
(3 Yellow Left), 4, 5, 6 to 9.
e
Press Stop/Exit.

Frequency (Color Correction)

You can set how often the color correction
(Color Calibration and Auto Registration)
occurs. The default setting is Normal. The
color correction process consumes some
amount of the toner.
A
a
Press Menu, 3, 9.
A
b
Press a or b to choose Normal, Low or
Off.
Press OK.
c
Press Stop/Exit.
A
Routine maintenance
77
A
A