Changing Return Value Of Usb No./Switching Dither Pattern; Switching Of Timing To Execute Auto Registration; (2-Sided Printing Model Only) (Function Code 45) - Brother MFC-9130CW Service Manual

1.4.14 Changing return value of USB No./Switching Dither Pattern/

Switching of ON/OFF of DirectPrint Color mode-Improve Gray Color/

Switching of timing to execute Auto Registration/

Adjusting left-end print start position on second side in duplex printing

(2-sided printing model only) (Function code 45)

■ Changing return value of USB No.
<Function>
When the OS of the computer is Windows Vista
through USB 2.0 full speed, the OS might fail to get the serial number of the USB device
depending on the computer and USB device. When the OS fails to get the serial number, the
return value may continue to increase every time the device is connected to the computer.
To avoid this problem, you can fix the return value of the USB No. to "0" by setting "USBNo. = ON".
LCD
USBNo. = ON
USBNo. = OFF
"*" is displayed at the end of the currently specified function in the LCD display.
<Operating procedure>
(1) Press the 4 and 5 keys in this order in the initial state of the maintenance mode.
"USBNo." is displayed on the LCD.
(2) Press the Mono Start key.
When you press the
it to "0", display "USBNo. = ON" or "USBNo. = OFF", respectively.
(3) Press the Mono Start key. "Accepted" is displayed on the LCD, and the machine returns
to the initial state of the maintenance mode.
(4) Turn OFF the power switch of the machine.
Note:
This function is enabled when the power of the machine is turned OFF and ON.
®
, and the computer is connected to a device
Returns the serial number of the machine. (default)
Returns "0".
or key to fix the return value of serial number to "0" or not to fix
5-29
Description
Confidential