Brother MFC-9130CW Service Manual page 366

LCD
P-Pos Y-Offset Configure the setting for the offset print position of the portrait
orientation. Effective for the print from the computer. When set the
Y-Offset on the computer, the setting becomes effective.
And this setting is ignored.
AutoFF Configure the setting for the ON/OFF of the Auto Form Feed. Effective
for the print from the computer.
AutoFF Time Configure the setting for the TimeOut, when the Auto Form Feed is ON.
FF Surpress Configure the setting for the skip of the blank page. Effective for the
print from the computer. The blank data in the Copy/Fax cannot be
turned ON/OFF in this setting.
Auto LF Configure the setting for the auto line feed.
Auto CR Configure the setting for the auto Carriage Return.
Auto WRAP Configure the setting for the auto CRLF at the print width.
Auto Skip Configure the setting for the skip at the back-end/tip of the paper and
add the blank space.
Left Margin Configure the setting for the column space at the left end.
Right Margin Configure the setting for the column space at the right end.
Top Margin Configure the setting for the space at the top end.
Bottom Margin Configure the setting for the space at the bottom end.
Lines Configure the setting for the number of the lines in the PCL.
Error Print Configure the setting for the ErrorPrint of the BR-Script3.
Detail description
5-28
Confidential