Brother MFC-9130CW Service Manual page 71

Code 1 Code 2
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not correct.
40 11 Group number not registered in relay broadcasting
was selected or the total of broadcast destinations
exceeded the allowed maximum destinations.
40 12 Retrieval was done though the machine had not been
waiting for retrieval.
40 13 Polled by any other manufacturers' terminal while
waiting for secure polling.
40 14 No common key is registered when a common key is
used.
40 15 Instructions for red and black color reception while red
and black reception disabled.
40 16 Instructions for cipher communications while cipher
reception disabled.
40 17 Invalid resolution selected.
40 20 Invalid full color mode selected.
50 01 Vertical resolution capability changed after
calibration of background color.
63 01 Password plus "lower 4 digits of telephone number"
not coincident.
63 02 Password not correct.
63 03 Polling ID not correct.
63 04 Provided confidential ID and mailbox ID are different.
63 05 Relay broadcasting ID inconsistency
63 06 Provided retrieval ID and mailbox retrieval ID are
different.
63 07 Select reception ID inconsistency
63 08 Cipher Key inconsistency
74 xx DCN received.
80 01 Fallback impossible.
90 01 Unable to detect video signals or commands within 6
seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or block
count.
A0 03 Error correction sequence not terminated even at the
final transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
Cause
2-32
Refer to:
4.13.4
4.13.4
4.11.1
4.13.4
4.13.1
4.13.1
4.13.1
4.13.1
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.13.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.2
4.13.2
4.13.4
4.13.4
4.13.4
4.13.4
4.13.4
4.14.7
Confidential