8.5
Fuser Unit
(1) Remove the Taptite bind B M3x10 screw from the Fuser cover L.
(2) Remove the Pin to remove the Fuser cover L from the Main body.
(3) Remove the Taptite bind B M3x10 screw to remove the Fuser cover R from the Main body.
Main body
Assembling Note:
After assembling the Fuser cover R, make sure that the Heater harness is not visible.
Main body
Fig. 3-9
Fig. 3-10
3-33
Pin
Taptite bind B M3x10
Fuser cover L
<Back side>
<Back side>
Fuser cover R
Taptite bind B
M3x10
Confidential