Brother MFC-9130CW Service Manual page 66

Error message
Upper line
No Tray The paper tray
cannot be
detected, re-install
Tray1
No Waste Install the Waste
Toner Toner Box.
Refer to the User's
Guide for
instructions.
Out of Press Stop Key
Memory
Secure Print Data
is full.
Press Stop Key
and delete the
previously stored
data.
Registration See
failed Troubleshooting
chapter in User's
Guide.
Press [OK], and try
again.
Insufficient Toner
for Registration.
Replace -
Drum
Replace Belt Unit
Parts
Fuser Unit
WT Box End Soon
PF kit
Lower line
The paper feed sensor detected
that no tray was set.
BCLN terminal current value
detected that no waste toner box
was set.
The memory is insufficient to
expand the data of PC-Print.
The memory used to store secure
print data exceeded the memory
size for secure print data.
Color registration failed.
Automatic color registration failed.
Color registration failed.
During automatic color
registration, a color toner cartridge
became empty.
Number of the drum unit rotations
has reached the upper limit.
The number of pages printed with
the belt unit has reached the upper
limit or will reach the upper limit
soon.
Printable pages set for the fuser
unit has reached the upper limit.
The waste toner sensor detected
that the waste toner box is almost
full.
Printable pages set for the PF kit 1
has reached the upper limit.
2-27
Description
Error Refer
codes to:
8501 2-61
8505
6300 2-52
C700 2-78
C800 2-78
9901 2-68
9A01 2-70
9A03
9902 2-68
9903 2-69
9A02 2-70
4201 2-43
4202
4203
4204
4300 2-43
4400
4500 2-44
4700 2-44
5002 2-47
Confidential