Brother MFC-9130CW Service Manual page 287

8.52 Develop Release Clutch
(1) Disconnect the wiring of the Registration clutch harness.
(2) Remove the Taptite cup S M3x8 SR screw. Release the three Hooks to remove the
Develop clutch gear cover from the Side frame L ASSY.
<Left side>
Develop clutch
gear cover
Hook
Taptite cup S M3x8 SR
(3) Remove the Develop release drive gear Z33 from the Side frame L ASSY.
<Left side>
Develop release
drive gear Z33
Hook
Fig. 3-174
Side frame L ASSY
Fig. 3-175
3-124
Side frame L ASSY
Develop release
gear Z34
Confidential