Brother MFC-9130CW Service Manual page 401

LCD
ADSX_PG:00000000
ADDX_PG:00000000
FB_PG:000000
ADSX_JAM:000000
ADDX_JAM:000000
COMERR:
CDEV_BIAS:400V
MDEV_BIAS:400V
YDEV_BIAS:400V
KDEV_BIAS:400V
*5
ENGERR01:000000
HODN_ER:0000
FUSR_ER:0000
BCLN:00000000
DEVSTATUS__01:00
*1
The serial number can be changed according to the steps below.
1) Press the 9, 4, 7, and 5 key in this order while the serial number is displayed.
The cursor appears on the first digit of the serial number on the LCD, and edit mode is
entered.
2) Enter the number of the first digit of the serial number using the ten-key pad.
The cursor moves to the second digit. Similarly, repeat the entering of the serial
numbers of the 2nd to the last 15th digit.
<How to enter alphabets>
Keep pressing a corresponding key in the ten-key pad based on the table given below
until the alphabet you want to enter is displayed.
Ten-key pad
2
3
4
5
6
7
8
9
3) When you press the SET key, the serial number is written and the machine returns to
the initial state of the maintenance mode.
Number of pages scanned in one-sided scanning with the ADF
Number of pages scanned in two-sided scanning with the ADF
Number of pages scanned with the document glass
Number of jams that occurred at one-sided scanning with the ADF
Number of jams that occurred at two-sided scanning with the ADF
Last communication error code (Past 3 error history)
Cyan developing bias voltage
Magenta developing bias voltage
Yellow developing bias voltage
Black developing bias voltage
Engine error history (Past 10 error history)
Number of electric discharge errors
Number of fuser unit errors
Number of belt cleaner roller rotations
*6
Log for design analysis
Corresponding alphabet
2→A→B→C
3→D→E→F
4→G→H→I
5→J→K→L
6→M→N→O
7→P→Q→R→S
8→T→U→V
9→W→X→Y→Z
5-63
Description
Confidential