Software Setting Problems; Cannot Print Data - Brother MFC-9130CW Service Manual

4.4

Software Setting Problems

The end user can solve problems pertaining to software, for instance, print cannot be made
from a computer although test print and printer setting print can be made from the machine,
by following the User Check items. If the same problem occurs, follow each procedure in the
order of the number described in the Step column in the tables below.
4.4.1

Cannot print data

<User Check>
- Check that the USB cable or LAN cable is not damaged.
- Check that the correct machine is selected if you have an interface switching device.
- Check the descriptions on the software setting in the User's guide.
- Check the driver setting.
- Restore the settings at factory shipment. (Refer to User's guide.)
Step
1
2
* Follow the procedures below to verify the product ID in Macintosh.
(1)Select [About This Mac] from the [Apple] menu.
(2)Click the [More Info...] button in the [About This Mac] dialog box.
(3)Select [USB] under the [Hardware] in [Contents] on the left side.
(4)Select the machine (MFC-XXXX or DCP-XXXX) from [USB Device Tree].
(5)Check [Product ID] in [MFC-XXXX or DCP-XXXX].
■ Product ID (Hexadecimal)
DCP-9020CDW: 02D3h
DCP-9020CDN: 02B1h
MFC-9130CW: 02ADh
MFC-9140CDN: 02AEh
MFC-9330CDW: 02AFh
MFC-9340CDW: 02B0h
Cause
Machine connection
Main PCB failure
When using Macintosh, check the product
ID* in Macintosh and update the firmware if
the product ID is not correct.
Replace the main PCB ASSY.
2-103
Remedy
Confidential