Brother MFC-9130CW Service Manual page 102

■ Error code 8D01
Short paper
Open the Back Cover and then press Start
The registration rear sensor detected that the paper loaded in the paper tray was smaller than
the specified size.
<User Check>
- Open the back cover and print using the straight paper path.
- Length of the paper is 140 mm or more.
Step
1 Registration rear actuator
catching on some position
2 Registration rear sensor failure
3 Main PCB failure
■ Error code 8D02
Small paper
Open the Back Cover and then press Start
When printing with the back cover closed, the paper size selected in the print data is smaller
than the valid size.
<User Check>
- Check whether the back cover is open.
Step
1 Main PCB failure
■ Error code 8E01
Size mismatch
Reload correct paper.
Upon fax reception, the paper size setting is the one other than A4, Letter, Legal, and Folio.
<User Check>
- Set the paper size to A4, Letter, Legal, or Folio.
Step
1 Main PCB failure
Cause
Cause
Cause
2-63
Remedy
Re-assemble the registration rear
actuator.
Replace the paper feed unit.
Replace the main PCB ASSY.
Remedy
Replace the main PCB ASSY.
Remedy
Replace the main PCB ASSY.
Confidential