■ Horizontal stripes
<User Check>
Step
1
Dirt on charged electrode
2
Scratch and dirt on fuser unit
3
High-voltage power supply
PCB failure
■ Light vertical steaks and bands on one color image
<User Check>
- Clean the inside of the machine and the corona wire of each drum unit for all four colors.
(Refer to
fig. 2-7 (P2-50)
- Check if dust adheres to the area of the toner cartridge corresponding to the location where
the white vertical streak appears.
- Refer to the User's guide and remove the dirt on the exposure drum using a cotton swab.
- Replace the drum unit or toner cartridge with a new one.
- Clean the LED ASSY.
Step
1
Condensation
2
LED ASSY failure
- Clean the corona wire of each drum unit for all four colors.
- This symptom might stop occurring after making several prints.
- Refer to the User's guide and remove the dirt on the exposure drum
using a cotton swab.
- Replace the drum unit or toner cartridge with a new one.
Cause
and
fig. 2-8
(P2-51))
Cause
2-95
Remedy
Wipe dirt off.
Replace the fuser unit.
Replace the high-voltage power supply PCB
ASSY.
Remedy
Print several pages or leave the machine for
about two hours with the power turned ON.
Replace the LED ASSY.
Confidential