Brother MFC-9130CW Service Manual page 117

■ Error code C700
Out of Memory
Press Stop Key
The memory is insufficient to expand the data of PC-Print.
Error code C800
Out of Memory
Secure Print Data is full. Press Stop Key and delete the previously stored data.
The memory used to store secure print data exceeded the memory size for secure print data.
<User Check>
- Print the print data stored in the memory.
- Divide the print data and print it.
Step
1 Main PCB failure
■ Error code D100
Print Unable D1
See Troubleshooting and routine maintenance chapter in User's Guide.
An error occurred during modem initialization.
Step
1 Modem PCB failure
2 Main PCB failure
■ Error code D200
Machine Error
The machine detected that the modem PCB was disconnected.
Step
1 Modem PCB harness connection
failure
2 Modem PCB failure
3 Main PCB failure
Cause
Cause
Cause
2-78
Remedy
Replace the main PCB ASSY.
Remedy
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
Remedy
Check the modem PCB harness
connection and reconnect it.
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
Confidential