Sending Via An Internet Relay - Panasonic Workio DP-190 Operating Instructions Manual

Sending via an Internet Relay

To a Location That Has a
programmed Relay Station
Once you have recorded all
the necessary parameters in
your machine, you can send
a document to one or
multiple G3 Fax machines
automatically through the
Internet Relay Station by
using the following
procedure. The Internet
Relay Station must have all
the required parameters
setup.
Sending via an Internet Relay
To a Location that Does Not Have a Pre-programmed Relay Station
1
6
<02> STOCKHOLM
4681111234
NOTE
122
Advanced Internet Fax Features
Relayed Transmission
1
or
2
or
1. The "#" character is not available for the email address of the relay station.
2. Gray Scale (F8-8) and Color functions are not available when sending via an Internet Relay.
2
7 The document(s) is stored into memory and your machine starts
sending the document(s) to the Relay email address of the Relay
Station with the telephone number for the End Receiving Station.
Ex: End Receiving Station : 4681111234
Relay Station
After the Relay Station completes its transmission to the End
Receiving Station(s), your machine receives a COMM. Journal from
the Relay Station.
This Journal confirms whether the Internet Relayed Transmission
was successful.
3
Ex:
Q 01
Enter only the telephone
number(s) of the End
Receiving Station(s).
• Quick Name Search
• One-Touch/ABBR Dialing
• Directory Search Dialing
(For details, see page 20)
3
(Telephone number)
[see Note]
: uk-rly@london.panasonic.co.uk
(One-Touch)