Panasonic Workio DP-190 Operating Instructions Manual page 19

No. Icon
RESET Key
Resets all features to the initial power-
18 on state.
SET Key
Used to Set operations.
20
FUNCTION Key
Used to start or select the function and
subfunctions. These functions are
22
explained in detail on page 14.
ALARM LED (RED)
Lights/Flashes when trouble occurs.
Lights:
Machine detected a trouble status.
• No paper in the selected tray or toner
has run out.
• Machine detected trouble, such as
24
paper misfed or jammed.
Flashes:
Machine detected an alarm status.
• No paper in the Tray. (Tray not
selected)
• Toner is getting low, etc.
26
CONTRAST Key
To adjust the Manual Exposure.
27
Used for Copier or Network Scanner Functions.
1
8
9
29
~
30
END_ti1_2
Contents No.
19
21
23
25
Keyboard
• Used to input the Characters. (To switch between Upper/Lower
character, press Shift key(
• Used for One-Touch Keys, Program Keys.
• Used to enter a symbol for the LOGO, Character ID, Station Name
and for the Email address. Use
symbol(s).
Icon Contents
Keypad
• Used for manual number dialing,
recording phone numbers and
numerical entries.
CLEAR Key
• Use this button when correcting
entered numbers or characters.
ACTIVE LED (GREEN)
Flashes:
When machine is active.
Lights:
When the received fax message is in
memory.
PRINT DATA LED (GREEN)
Flashes:
When receiving printing data.
Lights:
While printing.
))
or to select the desired
19