Table of Contents
Advertisement
•
When you start updating, "Status/Information" in "Port Field" changes to "Execute/Under Connection" as shown above, and then handsets
(phones) become ready for connection or power-on. Connect chargers to the handsets (phones).
•
To stop updating all at once, click "Stop All Ports" on "Tool Bar".
•
To stop updating individually, click "Stop" in "Port Field".
Note
* Depending on the handset (phone) status, it may take up to 1 minute before updating stops after you click "Stop All Ports" / "Stop" button.
* To restart updating for ports disabled due to an error, etc., follow the procedure above (click "Start All Ports" on "Tool Bar" and click "Connect" in
"Profile Field").
5) Basic rewriting procedure for handset (phone)
1. Preparation
<When you start SHDownLoader for the first time>
1) Add a serial port to a PC.
2) Start SHDownLoader and adjust settings of serial ports in "Option".
2. Rewriting procedure
<Preparation>
1) Start a PC after connecting all the necessary cables and other devices.
* When using a USB-UART conversion cable, make sure not to change the connection port. Otherwise the corresponding COM port will also
change.
* Communication may be disrupted if you connect cables or devices after starting a PC.
2) Start SHDownLoader.
* Always select the latest profile.
CONFIDENTIAL
Figure 17
2 – 9
902SH
Advertisement
Table of Contents
