Sharp 902SH Service Manual page 50

902SH
Standard Standard
position position
No protrusion
from the PWB
Holder, Hinge
[Holder, Hinge/Cushion, Hinge]
Cushion, Coaxial Cable
Holder,
Main PWB
[Cushion, Coaxial Cable]
Standard position
Standard
position
Regist
(Attach within the shaded
area.)
Put on the left corner,
without protrusion from
the register.
Kapton, Handling
(Left side view)
Standard
Connector
position
Rib Rib
[Cushion, Display PWB/Kapton, Handling]
Standard position: Centre
Screw Cover, Side
[Screw Cover, Side]
CONFIDENTIAL
Cushion, Hinge
Attach along
the resist line.
Main PWB-A
Standard position
Do not go beyond
the rib. Attach within
the shaded area.
Standard position
No contact with the circle
Display PWB-B
Cushion,
Display PWB
Connector
Front Cabinet,
Hinge
Standard position
Standard
position
Do not place on
the BBK shield
case cover.
Standard position
To the centre of the marking on
the BBK shield case cover.
No protrusion from the marking.
Do not get into
the cutout area.
Standard position
To the centre of
the thin coaxial
(Earth FPC)
[Thin Coaxial (Earth FPC)/FPC Retainer Kapton]
Standard position
Standard
position
Kapton, Display PWB
Display PWB-B
LED FPC Unit PWB-F
[Kapton, Display PWB/Cushion, LED FPC Unit]
3 – 2
Main PWB-A
Thin Coaxial (Earth FPC)
Standard position
Do not go beyond
the thin coaxial
(flexible earth)
FPC Retainer Kapton
Label, Qualcomm
Front Cabinet
(Key)
[Label, Qualcomm]
Standard position
Standard position
Standard position
Cushion,
LED FPC Unit
Deleted in the
December production.