Table of Contents
Advertisement
902SH
1. Change the option settings if necessary.
Default settings, when the tool is started for the first time, are as follows:
Port1
View Title
COM1
Port
Baud Rate
115200bps
Make sure to set the "Port" at the first start after the installation.
Example: COM3 port at 460,800 bps
*
Set following to restore the PC settings.
Port
\\.\COM1
Baud Rate
115200
After completing changes, click "Save".
2. Connect the communication cable to the handset (phone).
*
10-pin flat cable which connects the PC's serial port and the handset's (phone's) handsfree microphone connector.
3. Click "Start".
4. Supply power to the handset (phone).
Refer to Appendix 1 for the display after loading information.
5. When this application is finished, the SPST function selection screen returns.
CONFIDENTIAL
Figure 25
Figure 26 Waiting for connection
Figure 27 Loading information
2 – 14
Advertisement
Table of Contents
