Panasonic KX-TDA50 Programming Manual page 203

Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card is pulled out from the sub-slot, or is not communicating with the PBX.
Maintenance Console Location
2.7.25 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Input Signal Decision Time
Specifies the minimum duration of continuous input from the triggered sensor before the PBX
recognizes the input and makes a sensor call.
Default
1024 ms
Value Range
32 × n (n=2–255) ms
Maintenance Console Location
2.7.25 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.11.7 [5-5] External Sensor
Feature Manual References
1.5.9 External Sensor
Input Signal Detection Reopening Time
Specifies the length of time after the sensor has been triggered during which any further input from
the sensor will be ignored.
Default
10 s
Value Range
10 × n (n=1–255) s
Maintenance Console Location
2.7.25 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7 [1] Configuration
PC Programming Manual 203