Panasonic KX-TDA50 Programming Manual page 435

Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.6 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Default
For KX-TDA50:
ICM
For KX-TDA100/KX-TDA200/KX-TDA600:
ICM/PDN
Value Range
For KX-TDA50:
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM: An extension line is seized.
F-1–F-36: A CO line programmed for a flexible CO button (F-1–F-36) is seized. A flexible CO button
customized as a Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
For KX-TDA100/KX-TDA200/KX-TDA600:
No Line: No line is seized.
2.10 [4] Extension
PC Programming Manual 435