Remote Access - Panasonic KX-TDA50 Programming Manual

2.11 [5] Optional Device
Programming Manual References
2.10.9 [4-1-7] Wired Extension—Simplified Voice Message (KX-TDA50 only)
2.10.16 [4-2-5] Portable Station—Simplified Voice Message (KX-TDA50 only)
Feature Manual References
1.16.5 SVM (Simplified Voice Message)

Remote Access

Selects whether the Walking COS feature can be used while listening to a greeting message from the
SVM feature. Using Walking COS, a user can access his or her message box remotely.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM (KX-TDA50 only)
Programming Manual References
2.10.9 [4-1-7] Wired Extension—Simplified Voice Message (KX-TDA50 only)
2.10.16 [4-2-5] Portable Station—Simplified Voice Message (KX-TDA50 only)
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call
when an extension user records a greeting message or callers leave voice messages in a message
box.
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the SVM2 card to "OUS", then "INS".
Default
Fixed
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is
fixed to 4 times in the ranges of:
A
B
588 PC Programming Manual
C C
C
D D D