Panasonic SC-ALL2 Operating Instructions Manual page 15

5
Select your network name (SSID) and type the password.
≥ Check the wireless router for the network name (SSID) and the password.
≥ A list of network names (SSIDs) will be appeared when you select the
"Network Name" box.
≥ To show the characters typed in the "Password" box, select "Show
Password".
≥ If your network requires specific settings, deselect "DHCP" to disable DHCP.
– You can use specific IP address, subnet mask, default gateway, primary
DNS, etc.
6
Select "Connect" to apply the settings.
≥ When the connection is established, the network indicator (blue) lights up.
≥ Depending on the device, the connection complete screen may not be
displayed.
If the network indicator does not light up, check the network name
(SSID) and the password, and then try the setting again.
7
Make sure to connect your compatible device back to your
home wireless network.
≥ Enable Java and cookies in your browser settings.
●●●●●●●●
- 15 -