Changing The Display Mode; Dimmer Function - Panasonic SC-ALL2 Operating Instructions Manual

Changing the display mode

Touch [DISP].
Each time you touch [DISP], the display changes as follows:
Blank display
≥ During playback of a preset channel, the current preset channel number will be
shown for a few seconds when you touch [DISP].
– When you touch [DISP] repeatedly, the display changes as follows:
Blank display

Dimmer function

You can change the brightness of the display and indicators.
1
Touch and hold [DISP] for at least 4 seconds.
2
Touch [VOL –] or [VOL +] to change the setting.
3
Touch [DISP] to confirm the setting.
≥ If "d: 1" or "d: 2" is selected, the display and indicators will brighten when you
perform some operations.
Clock display / "--:--"
Preset channel
number
Display
d: 0
d: 1
d: 2
Clock display / "--:--"
- 41 -
Preset channel
number
Brightness
Bright
Dim