Lutcontrol - Toshiba BG205M-CS Instruction Manual

LUTControl

This section describes LUTControl category for the BG series.
This function allows you to apply the
● Registers
Register Visibility
LUTSelector Expert
LUTEnable Expert
LUTIndex Guru
LUTValue Guru
● Setting
- Set the activation of LUT
Set the following value to "LUTEnable" register. The setting value is Boolean type.
- Set the input/output value of LUT
Set the following value to "LUTIndex", "LUTValue" registers. These setting values are Integer type.
"LUTIndex" register value is input level of LUT process, and "LUTValue" register value is output level of
LUT process.
● Note
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
LUT(input: 10bit, output: 10bit) to the output images.
arbitrary
Access
R Returns the luminance component of LUT process.
R/W Sets the activation of LUT process.
R/W Sets the input level of LUT process.
R/W Sets the output level of LUT process.
Value
FALSE (*)
TRUE
LUTIndex / LUTValue
Minimum (*)
Maximum
68 / 80
Description
Function
Inactivation
Activation
* initial factory setting
Value
0
1023
* initial factory setting
http://www.toshiba-teli.co.jp/index.htm
D4235067D