Advertisement
Problem
EN
The appliance does not heat up.
The appliance does not produce
any steam.
The steam output is irregular.
Water droplets drip from the
steamer head.
The appliance produces a croak-
ing sound.
Water spills out of the filling
opening when the cap is closed.
An excessive amount of water
drips out of the steamer head
when the appliance is heating up.
The suction power is weakening.
The suction function does not
work.
When I use the suction
function,the suction is not strong.
Possible cause
There is a connection problem
You have not switched on the
appliance.
The steamer has not heated up
sufficiently.
Steam has condensed in the hose.
The water level is below the MIN
level indication.
You have placed the steamer
on a table or chair instead of on
the floor.
Steam has condensed in the hose
or in the steamer head.
You have placed the steamer
on a table or chair instead of on
the floor.
Steam has condensed in the hose.
You have left the steamer head
and/or the steam supply hose
in horizontal position for a long
time.
You have placed the steamer
on a table or chair instead of on
the floor.
When the hose forms a U-shape,
condensation present in the
hose cannot flow back into the
water tank.
You have left the steamer head
and/or the steam supply hose
in horizontal position for a long
time.
You have put too much water in
the water tank
The water in the appliance is
dirty or has been left inside the
appliance for a long time.
Fluff has collected in the grille and
has clogged up the openings.
You are not pressing the suction
button continuously.
You are making fast strokes.
Solution
Check the mains plug and the wall socket.
Press the on/off button to switch on the appli-
ance.
Let the appliance heat up for approx. 2 minutes.
Lift the steamer head to straighten the hose
vertically. This allows any condensation to flow
back into the water tank.
Fill water tank to the MAX level indication.
Place the steamer on the floor.
Lift the steamer head to straighten the hose
vertically. This allows any condensation to flow
back into the water tank.
Place the steamer on the floor.
Lift the steamer head to straighten the hose
vertically. This allows any condensation to flow
back into the water tank.
Lift the steamer head to straighten the hose
vertically. This allows any condensation to flow
back into the water tank.
Place the steamer on the floor.
Lift the steamer head to straighten the hose
vertically. This allows any condensation to flow
back into the water tank.
Lift the steamer head to straighten the hose
vertically. This allows condensation to flow back
into the water tank.
Do not fill the water tank above the MAX
levelindication.
Remove all water from the water tank and rinse
it with clean water, see
Regularly clean the grille to prevent fluff from
clogging up the grille openings.
To use the suction function, press the suction
button continuously
Make slow downward strokes when you use
the suction function.
13
Advertisement
