Replacing The Transmitter Battery - Silvercrest SFK 16 A1 User Manual

Wireless Doorbell SFK 16 A1
labelled on the batteries and inside the
battery compartment.
- Slide the battery compartment cover onto
the receiver housing.

Replacing the transmitter battery

The transmitter battery is already fitted and
-
only requires replacement when it is empty.
To open the transmitter housing, use a flat
-
screwdriver. Insert the screwdriver carefully
into the transmitter housing side and press
it slightly inwards to release the nose latch
(8). Then pull the upper housing piece
upwards.
Remove the type A23 12 V battery from the
-
top section of the transmitter and replace
the empty battery with a new battery of the
same type. Always ensure correct polarity
of the battery (pay attention to the + and –
marks). The correct polarity is labelled on
the battery and inside the transmitter
housing.
16 - English