Safety Considerations; Equipment Supplied; Available Accessories - HP 5501B Operating And Service Manual

Laser head

Table of Contents

1-14. Safety Considerations

1-15.

The HP5501B Laser Head is designed to receive its power from a Safety Class 1 product. It is

designed and tested in accordance with international safety standard IEC* 348. It is also a Class

1/ Laser product certified as conforming to U. S. National Center for Devices and Radiological

Health Regulations 21 CFR ** 1040.10 and 1040.11. The instrument and the manual should be

inspected and reviewed for safety markings and instructions before operation. A safety summary

is included on the page following the title page.

1-17.

The HP5501B Laser Head is supplied with a test polarizer and two 4-pin connectors for use in

fabricating the power and reference cables. The HP Part Numbers for the three items are:

Test Polarizer

Reference Signal Connector (P1)

Power Connector (P2)

1-19.

The HP 10778B and HP 10779B cables may be ordered from Hewlett-Packard. Figures

2-2 show photos of the cables, identify the connector markings, and give the pin numbers and

corresponding wire color codes.

*IEC, International Electrotechnical Commission

**CFR, Code of Federal Regulations (U.S.A.)

1-4

1000-0616

1251-3450

1251-3447

HP5501B

Installation

2-1

and

Table of Contents