Replacing The Print Cartridge - Fujitsu Fi-718PR Operator's Manual

3.4. Replacing the Print Cartridge

The print cartridge is a consumable.
Replace the print cartridge in the following procedure.
ATTENTION
● When the following message appears, replace the print
cartridge as soon as possible. If you continue to print without
replacing the cartridge, your print output will be faded.
● When loading or replacing the print cartridge, be careful not to
insert it out of place.
1. Turn off the scanner.
2. Open the print cartridge cover.
3. Squeeze both ends of the print cartridge holder to
release the print cartridge holder lock and lift it
open.
4. Remove the print cartridge.
Print cartridge holder
5. Remove the protective tape from a new print
cartridge.
ATTENTION
Do not touch the metal part of the cartridge nor put the
protective tape back on.
6. Insert the print cartridge with its tab to the right.
ATTENTION
Be careful not to let the print cartridge touch or catch onto
the print circuit film.
7. To install the print cartridge, gently lower the
locking lever of the print cartridge holder until it
locks in place.
8. Position the print cartridge holder along where
the document will pass through.
ATTENTION
Note that when printing on the edge of the document, the
print cartridge may print outside the document depending on
its print position.
fi-718PR Imprinter Operator's Guide | 9