Fujitsu Fi-718PR Operator's Manual page 8

4. Select [3: Test Print] by pressing the [ ] or [ ]
button, and press the [Scan/Enter] button.
The [No. of Sheets Scanned] screen is shown on the LCD.
ATTENTION
If the Imprinter is disconnected or not connected properly,
[Cannot use this function because the Imprinter is not
connected.] is shown on the LCD.
5. Select [1: Single Sheet Only] or [2: Multiple
Sheets] by pressing the [ ] or [ ] button, and
press the [Scan/Enter] button.
When [2: Multiple Sheets] is selected, printing is
performed for all sheets set in the scanner.
The [Print Pattern] screen is shown on the LCD.
6. Select a print pattern by pressing the [ ] or [ ]
button, and press the [Scan/Enter] button.
HINT
Print Test Patterns
Test Pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test Pattern 2 (Horizontal）:
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test Pattern 3 (Horizontal):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
Test Pattern 4 (Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test Pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test Pattern 6 (Vertical):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
The numbering data portion "00000000" changes from 0
(Zero) with increment of 1 (one).
6 |
④
③
②
①
Print Test Sample
The [Test Print] screen is shown on the LCD.
7. Select [1: Yes] by pressing the [ ] button or [ ]
button, and press the [Scan/Enter] button.
The test sheet will be fed into the ADF, and the
imprinter will print out the Print Test Patterns
starting at 5 mm from the document's edge. (The
range of error is ±4 mm.)
8. To stop Test Print, press the [Power] button on
the operator panel on the scanner. The scanner
will be turned off.
⑥
⑤
5 mm