Error Messages - Fujitsu Fi-718PR Operator's Manual

Imprinter
Hide thumbs Also See for Fi-718PR:
Table of Contents

Advertisement

5. Error Messages

This chapter explains the Imprinter error messages.
Error messages are displayed on the operator panel of the scanner. Refer to the error code and message for troubleshooting.
HINT
For details on the error messages displayed on the operator panel and other errors, refer to the "fi-7160/fi-7260/fi-7180/fi-7280 Image
Scanner Operator's Guide" included in the Setup DVD-ROM provided with the fi-7160/fi-7180.
Error Code
U5:4A (*1)
Imprinter Cover Open
U6:B4
Print cartridge not installed
U7:B9
Imprinting area error
A0:B2
Imprinter error (RAM)
A1:B3
Imprinter error (communication timeout)
A2:B5
Imprinter error (print head)
A3:B6
Imprinter error (EEPROM)
A4:B8
Imprinter error (ROM)
H6:B1
Imprinter system error
*1: When you open the imprinter print section while the scanner is in standby, only an error message will appear without an
error code. Also, note that buttons on the operator panel are disabled while the imprinter print section is open.
14 |
Error Message
Remedy
Close the print section of the imprinter, and load the
document again.
No print cartridge is installed.
Check if the print cartridge is mounted correctly.
If the problem persists, write down the displayed
error code and contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service
provider.
Adjust the imprinting start position and the imprinter
strings to fit the imprinting area in the document.
An error occurred in the Imprinter.
Try the following:
1. Confirm that the EXT cable of the imprinter is
connected properly to the EXT connector on the
back of the scanner.
2. Confirm that the print cartridge is installed
correctly.
3. Turn the scanner off then back on. If the problem
persists, write down the displayed error code and
contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
An error occurred in the Imprinter.
Turn the scanner off then back on.
If the problem persists, write down the displayed
error code and contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service
provider.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents