Specifications - Fujitsu Fi-718PR Operator's Manual

6. Specifications

Item
Printing Method
Print Timing
Printing Characters
Maximum number of
characters per line
Print orientation
Character size
Character pitch
Font Style
Character width
Document that can be
scanned
Printing area
Accuracy of Printing
position
Dimension
Weight
Ambient condition
Consumable
Thermal inkjet printing
Post printing
Alphabet : A to Z, a to z
Numeric characters : 0, 1 to 9
Symbols : ! " $ # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _' { | }¯
Maximum 43 characters
Normal: 0º, 180º (horizontal), 90º, 270º (vertical)
Narrow: 0º, 180º (horizontal)
Normal: Height 2.91 × width 2.82 mm (horizontal orientation),
Height 2.82 × width 2.91 mm (vertical orientation)
Narrow: Height 2.91 × width 2.12 mm (horizontal orientation)
3.53 mm (Normal), 2.54 mm (Narrow)
Regular, Bold
Normal, Narrow
Documents supported by the fi-7160/fi-7180
For the details for fi-7160/fi-7180, refer to "fi-7160/fi-7260/fi-7180/fi-7280 Image Scanner Operator's
Guide"-"2.3 Documents for Scanning (ADF) Specifications".
Note that paper weight should be 52 to 127 g/m
ATTENTION
● Documents with glossy surface such as thermal paper, thermal transfer paper, coated
paper, and art paper take longer time for the ink to dry and may cause poor print quality.
The imprinter must be cleaned more frequently if you use these types of papers.
● Thick plastic documents such as credit cards and ScanSnap Carrier Sheet cannot be
scanned when the imprinter is installed.
D
Printing Area
(Back)
C
A
±4 mm from the starting point for feed direction
Without scanner : 300(W) × 255(D) × 136(H) mm / 11.81(W) × 10.04(D) × 5.35(H) in.
With scanner : 300(W) × 266(D) × 208(H) mm / 11.81(W) × 10.47(D) × 8.91(H) in.
(Excluding the interface cable, ADF paper chute (feeder) and stacker)
2.7 kg (5.95 lb)
Temperature: 10 to 35ºC (50 to 95 ºF), Humidity: 20 to 80%
Print Cartridge (P/N: CA00050-0262)
The printable number of characters: 4,000,000 characters (May decrease depending on the font selection)
Replacement cycle : 4,000,000 characters or six months after opening
Specification
2
(14 to 34 lb).
A=5 mm
B=5 mm
C=5 mm
D=5 mm
(0.20 in.)
ATTENTION
Do not print within 5 mm from the
edge of the document.
B
fi-718PR Imprinter Operator's Guide | 15