the keys are out of operation. Only the SNOOZE /
LIGHT key
can be operated. In the event the
17
alarm goes off, the search for a signal will be ended.
As soon as the signal is found, the radio symbol
goes out.
Operation
Setting the 12 / 24 hour display
Note: No settings are possible during reception of
the DCF radio signal. Therefore, press the - / C / F /
RCC key
for about 3 seconds to interrupt reception
24
of the DCF radio signal.
1. Press the - / C / F / RCC key
2 seconds until the radio symbol
2. Press the - / C / F / RCC key
about 2 seconds to manually deactivate reception
of the DCF radio signal.
3. Hold the SET key
2 seconds. The time display
4. Press the + / 12 / 24 key
RCC key
24
(12 / 24 hours).
Tip: Hold the + / 12 / 24-key
RCC-key
24
the setting of the values. This fast setting can also
be used for the additional setting processes. If
you do not press any key within 20 seconds, the
LC display automatically returns to the standard
display.
5. Press the SET key
6. Repeat steps 3 to 5 to set the values for minute,
hour, date / month or month / date, day, year
and language.
14
24
24
pressed down for about
21
23
to specify the desired time setting
pressed down. This will accelerate
to confirm your entry.
21
for about
blinks.
4
once again for
blinks.
1
or the - / C / F /
or the - / C / F /
23
12
GB/IE
4
–
13