Table of Contents
Advertisement
Rear Panel Description
•
•
•
For information about the XPS 2200, see the Cisco eXpandable Power System 2200 Hardware
Installation Guide on Cisco.com:
http://www.cisco.com/go/xps2200_hw
See the switch software configuration guide on Cisco.com:
http://www.cisco.com/en/US/products/ps10745/products_installation_and_configuration_guides_list.html
StackPower Connector (Catalyst 3750-X Switches)
The Catalyst 3750-X switches have a StackPower connector for use with Cisco StackPower cables to
configure a switch power stack that includes up to four switches. By adding an XPS 2200 expandable
power system, you can configure a power stack that comprises up to nine switches. A switch power stack
can be configured in redundant or power-sharing mode.
You can order these StackPower cables from your Cisco sales representative:
•
•
For details about connecting StackPower cables and StackPower guidelines, see the
StackPower Stack (Catalyst 3750-X Switches)" section on page
Management Ports
Ethernet Management Port
You can connect the switch to a host such as a Windows workstation or a terminal server through the
10/100 Ethernet management port or one of the console ports (see
10/100 Ethernet management port connection uses a RJ-45 crossover or straight-through cable. The
RJ-45 console port connection uses the supplied RJ-45-to-DB-9 female cable. The USB console port
uses a USB type-A-to-USB 5-pin mini-Type B cable.
Table 1-20
Table 1-20
Color
Green
Off
Amber
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
1-24
Report when a switch is powered by the XPS
Report the XPS power supply module status
Read and monitor backup, failure, and exception history
CAB-SPWR-30CM (0.3-meter cable)
CAB-SPWR-150CM (1.5-meter cable)
shows the Ethernet management port LED colors and their meanings.
RJ-45 Console Port LED
Description
Active link to PC
Inactive link
POST failure
Chapter 1
Product Overview
"Planning a
2-9.
Figure 1-6
and
Figure
1-7). The
OL-19593-03
Advertisement
Table of Contents
