Electrolux EN19WI30LS Installation Manual page 8

• Avoid installation above gas ranges or stoves.
• Avoid installation between the kitchen fan and stove. If oily
fumes or a large amount of steam are present in the installation
location, take measures to prevent the fumes and steam from
entering in the equipment.
• Install in a location where the exhaust gas flow will not be
affected by fans or range hoods.
• Take care that noise and exhaust gas will not affect neighbors.
Avoid installation on common walls as the unit will make some
operational noises while it is running.
• Before installing, make sure that the exhaust flue termination will
have the proper clearances according to the National Fuel Gas
Code (ANSI Z223.1).
State of California: The water heater must be braced, anchored or strapped to avoid moving during
an earthquake. Contact local utilities for code requirements in your area or call: Electrolux Home
Products, Inc. at 1-888-360-8557 and request instructions.
The Commonwealth of Massachusetts: The water heater can be used for hot water only and not in a
combination of domestic and space heating.
For Venting Manufacturers Requirements, call Electrolux Home Products, Inc. at 1-888-360-8557 or
visit us at www. electroluxappliances. com.
6
CAUTION
Prohibited
Be sure to do
Prohibited