Table of Contents
Advertisement
NOTE: Avoid diagonal insertion of the expansion memory board
for the slot.
NOTE: Do not push one end of the expansion memory board by
one hand.
NOTE: Hold the both ends of the expansion memory board with
both hands, and put down the expansion memory so that it
is vertical to the PWB.
At that time, check to confirm that the hooks on the left and
the right sides of the slot are securely locked.
MX-5111N MX-SM10 (EXPANSION MEMORY BOARD) 31 – 2
C. Reattach the control PWB and the right rear
cabinet.
• If the fax box unit is installed, carry out steps 1), 2), and 3)
additionally.
1)
Connect the interface cable to the control PWB unit.
2)
Push the interface cable into the recessed portion of the sheet
metal on the control PWB unit.
3)
Attach the snap band to the sheet metal of the control PWB
unit.
4)
Push the control PWB unit into the main unit.
5)
Secure the unit with the two screws.
6)
Fit the interface cable into the right rear cabinet cover.
7)
Attach the right rear cabinet cover to the main unit.
At this time, check that the four hooks are properly fitted to the
main unit.
8)
Secure the right rear cabinet with the screw.
Hook 1 Hook 2
7
8
Hook 3
Hook 4
6
Hide quick links:
Advertisement
Table of Contents
