Toshiba B-852-TS12-QP Owner's Manual page 22

2. PRINTER SETUP
2.7.3 Loading Media into the
Printer (Cont.)
NOTE:
The head pressure increases
when the Head Pressure Adjust
Lever is lowered. When using
labels or thick tag paper, lower
the Head Pressure Adjust
Lever. If the print tone is light,
lower the Head Pressure
Adjust Lever even when using
thin tag paper.
WARNING!
The Top Cover can be
opened during the
operation for control
purposes only. It should
be closed during normal
operation.
10. After loading the media, don't forget to move the Supply Holder
Unit to the forward notch of the Supply Roll Frame as shown below.
11. If you are using labels or thick tag paper, then it may be necessary to
increase the head pressure by lowering the Head Pressure Adjust
Lever in the figure below.
Head Pressure
Adjust Lever
Head Pressure Adjust Lever Position
UP:
Thin tag paper
DOWN: Label or Thick tag paper
E2-11
ENGLISH VERSION EO1-33028
2.7 Loading the Media