Shutting Down Bs2000 Via The Bs2000 Console - Fujitsu BS2000 SE700 User Manual

Shutting down BS2000 via the BS2000 console

3.7 Shutting down BS2000 via the BS2000 console
This section describes how you shut down BS20000.
In the SE Manager, select Systems, Overview tab.
Ê
The system overview lists all the systems which exist on the SE server. BS2000
systems are either of the type Native BS2000 or of the type VM2000.
Select the BS2000 system to be shut down and click on the name.
Ê
In the tree structure the SE Manager switches to the BS2000 system concerned and
displays the Operation tab.
In the Console and dialog, group, click Open in the BS2000 console function.
Ê
A BS2000 console window opens. The console is loaded.
Enter the /SHUTDOWN command (if necessary with specifications for the MODE and
Ê
MESSAGE operands to warn the participants in the BS2000 dialog).
Take note of the console messages and answer any question messages which are
Ê
issued.
Output of the message EXC0557 SHUTDOWN PROCESSING COMPLETED indicates that
shutdown of BS2000 has been completed.
Close the console window.
Ê
i
For information on console messages which are issued by M2000/X2000, see
„Messages on the BS2000 console" auf Seite
40
When you shut down the monitor system of a Server Unit operated in VM2000
mode, VM2000 mode is also terminated, i.e. all BS2000 VMs are shut down.
Provision should therefore be made beforehand in the monitor system to ensure
that VM2000 operation is terminated correctly so that all guest systems can be shut
down properly.
Power-on, starting up BS2000, shutdown
42.
Abschnitt
U41857-J-Z125-1-76