Power-on, starting up BS2000, shutdown
3.8 Powering off Server Units and other units
You manage the units of the SE server using the menu Hardware → Server (SE<model>).
When you expand this menu, all the existing units are listed.
Select Hardware and click Server (SE<model>).
Ê
The Units tab displays information on Server Units, Management Units (also redundant
MUs), HNCs (SU /390), and Application Units of the SE server.
Depending on the status, you use the Units tab to power a unit on or off or reboot it.
Shutting down the unit or immediately powering it off
Requirement
You can power off a unit only when the unit is accessible, i.e. the HW status is not
NOT_ACCESSIBLE.
Procedure
Click the Power off icon by the required unit.
Ê
In the dialog box which then appears, select the option Shut down or Power off
Ê
immediately and confirm the action with Execute.
i
The unit is shut down or powered off immediately. You will receive a message when the
operation has been completed.
U41857-J-Z125-1-76
Only Power off immediately is available for the SU /390. In this case shutdown is
possible only via the BS2000 console (see
via the BS2000 console" auf Seite
Powering off Server Units and other units
Abschnitt „Shutting down BS2000
40).
41