Application Units; Powering The Application Unit On And Off Via The Irmc - Fujitsu BS2000 SE700 User Manual

5 Application Units

As a rule an operating system of another vendor (Windows, Linux or Unix systems) runs on
an Application Unit. The scope of the setting and display options thus depends on the
operating system concerned. On an AU, an operating system can also be used in Native
mode on the AU, on a guest system which was configured under HyperV Windows Server
on the AU, or on a VM which was configured under VMware vSphere on the AU.
Application Units are displayed in the tree structure as <unit name>(AU<model>).
i

5.1 Powering the Application Unit on and off via the iRMC

You operate a Native system via the Operation tab.
In the tree structure select Systems → <unit name>(AU<model>), Operation tab.
Ê
Click iRMC and Open in the Operation tab in the Operation group.
Ê
The web interface of the AU's iRMC opens.
Click Login.
Ê
The login window is opened in the work area.
Enter the user name and password.
Ê
Click OK.
Ê
After a successful login the browser window displays the System Overview menu item of
the iRMC's graphical user interface. The System Status group shows that the AU is
powered off.
U41857-J-Z125-1-76
In M2000 V6.1 and higher, AUs are also supported on the basis of
PRIMEQUEST. When the AU is supported as an appliance delivery on the basis
of Oracle VM Server from FUJITSU, it is displayed as a Database Unit with the
short name DBU87. Otherwise the short name is displayed.
In the case of an AU87 or DBU87, systems run on the individual partitions of the
AU. You operate a partition via the Management Board. In the Operation tab,
you open the web interface of the Management Board (instead of the iRMC) in
the Operation group for this purpose.
45