Starting Up Bs2000 (Su X86) - Fujitsu BS2000 SE700 User Manual

Power-on, starting up BS2000, shutdown

3.5 Starting up BS2000 (SU x86)

BS2000 is started up on a Server Unit x86 in the KVP menu of the BS2000 console.
i
Depending on the SU x86's operating mode, select the following on the SE Manager:
Ê
●
●
Alternatively, select Systems→ <unit>(SU<x86>), Overview tab When you click on the
name of the BS2000 system, the SE Manager switches to the Operation tab of the
BS2000 system.
In the Console and dialog group, click Open on the BS2000 console function.
Ê
i
A BS2000 console window opens. The console is loaded. As BS2000 is not yet active, no
console messages can yet be seen.
Press the function key [F2] on your keyboard.
Ê
Alternative:
The KVP menu below is then displayed.
U41857-J-Z125-1-76
Some important SVP functions, for instance for IPL, are also available directly on
the SE Manager, see the "Operation and Administration" manual [5].
In BS2000 Native mode: Systems→ <unit>(SU<x86>) → BS2000 → MONITOR,
Operation tab
In VM2000 mode: Systems→ <unit>(SU<x86>) → Virtual machines → BS2000 →
MONITOR, Operation tab
The console mnemonic must be configured in the BS2000/OSD/BC parameter file;
in the default case, the console mnemonics C0 and C1 are defined.
If the browser now displays a warning about the security certificate, click Continue
to this website.
Click the function key [F2] on the virtual keyboard. (Click the keyboard icon at the
top right to open the virtual keyboard. Clicking the icon again closes the keyboard.)
Starting up BS2000 (SU x86)
35