How Can I Boot The Bs2000 On An Su X86 - Fujitsu BS2000 SE Series Manual

Booting the BS2000 on an SU x86

3.3 How can I boot the BS2000 on an SU x86?

Requirement
Logging into the SE Manager as administrator, B2000 administrator or a privileged
operator.
The Power status of the SU x86 shows the value On.
Procedure
Switch to the BS2000 system's Operation mode tab of the SU x86:
Ê
●
●
In the Console and dialog group, click Open in the BS2000 console function:
Ê
i
A BS2000 console window opens. The console is loaded. As BS2000 is not yet active, no
console messages can yet be seen.
20
in native BS2000 mode to the native BS2000 system:
in VM2000 mode to the monitor system:
The console mnemonic must be configured in the BS2000/OSD/BC parameter file;
in the default case, the console mnemonics C0 and C1 are defined.
If the browser now displays a warning about the security certificate, click Continue
to this website.
Powering on, starting up BS2000, powering off
U41857-J-Z125-2-76