Brother ADS-2000e User Manual page 107

Scan Using Your Computer
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in gray
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Color Drop Deletes specific colors from your scan data.
Select one of the following:
 Chromatic colors
Use to drop all colors except Black.
 Red
Use to drop the Red color.
Green

Use to drop the Green color.
 Blue
Use to drop the Blue color.
 Custom
Select the color that you want to remove.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
5
Yes
Yes
94