Enter An Email Address Manually - Brother ADS-2000e User Manual

Scan Using the Control Panel
4
Press . The software keyboard appears on the LCD.
NOTE
• The LDAP protocol supports you to search for email addresses on your server. For information on how to
configure LDAP protocol, see Changing LDAP Configuration in the Network User's Guide.
• The LDAP search result will be shown on the LCD with
5
Enter the initial characters for your search and then press OK. The machine starts searching the Address
Book, and then the search result will be shown.
6
Swipe left or right, or press a or b until you find the name you are looking for.
7
Press the name from the result.
8
Press Apply.
NOTE
• If you want to register an email address in the Address Book, see Set Up the Address Book (ADS-2500We
only) on page 142.
• You can select up to 300 email addresses from the Address Book and enter up to 50 email addresses
manually. The scanned data will be sent to all of the addresses at the same time.

Enter an email Address Manually

1
Swipe left or right, or press d or c to display Scan 2.
2
Press to E-mail Server.
3
Press Manual. The software keyboard appears on the LCD.
4
Enter an email address and then press OK.
5
Press OK.
NOTE
You can enter up to 50 email addresses manually. The scanned data will be sent to all of the addresses
at the same time.
before the local address book search result.
6
6
141