Table of Contents
Advertisement
HotSwap MBP
The HotSwap MBP allows you to service or replace the UPS without interrupting
the connected loads.
Standard installations for the HotSwap MBP
Rack installation
In a rack configuration, the MBP should always be mounted behind the extended
battery module(s) -- not behind the UPS.
Figure 4. 8/11k VA 1Phase
Figure 5. 8/11k VA 3Phase
HotSwap MBP controls
The HotSwap MBP has a manual rotary switch with two positions:
v UPS: the load is supplied by the UPS, and the UPS is supplied by the normal
v
Two lights indicate the HotSwap MBP power status:
Machine types and models
8/11k VA 1Phase MBP
8/11k VA 3Phase MBP
AC power source.
Bypass: the load is supplied directly by the bypass AC power source.
Weights
(lb/kg)
13.7 / 6.2
12.1 / 5.5
Dimensions (inch/mm)
D x W x H
8.7 x 13.2 x 5.1 / 220 x 336 x
130
5.2 x 13.2 x 5.1 / 132 x 336 x
130
Chapter 2. Presentation
15
Advertisement
Table of Contents
