Engine Electrical Devices; Repair Instructions; Ecm Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Engine Electrical Devices

Engine

ECM Removal and Installation

CAUTION
!
As ECM consists of precision parts, be
careful not to expose it to excessive shock.
Removal
1) Disconnect negative (–) cable at battery.
2) Remove ECM (1) from its bracket by removing its
mounting bolts (2).
3) Disconnect connectors from ECM as follows.
a) Push lock (1) to release locking of lock lever (2).
b) Turn lock lever to arrow direction until it stops.
1

Repair Instructions

S7RS0B1306001
2
1
2
I4RS0A130002-01
2
I4RS0A130003-01
Engine Electrical Devices:
Installation
Reverse removal procedure noting the following:
• Connect connectors to ECM as follows.
a. Make sure that lock lever of ECM connector is
unlock position.
b. Insert ECM connectors to ECM until it stops with
unlocked lock lever.
c. Lock ECM connectors securely by pulling its lock
lever up.
• Tighten ECM mounting bolts to specified torque.
Tightening torque
ECM mounting bolt (a): 8 N·m (0.8 kgf-m, 6.0 lb-
ft)
(a)
1C-1
I4RS0B130021-01
I4RS0B130022-01
I4RS0A130004-01
(a)
I4RS0A130005-01