Warning Lamp, Indicator Lamp Description; Can Communication System Description - Suzuki Swift Sport 2004 Service & Repair Manual

4F-6 Electronic Stability Program:

Warning Lamp, Indicator Lamp Description

There are five types of warning lamp and indicator lamp in instrument cluster, which are controlled by ESP® control
module. They give warning / indication to driver by changing the modes light ON / blinking / light OFF.
1. ESP® warning lamp
2. EBD warning lamp (brake warning lamp)
The followings are the condition and operation of warning lamps and indicator lamps.
Warning lamp / Indicator lamp
ABS warning lamp
EBD warning lamp (brake warning
lamp)
ESP® warning lamp
SLIP indicator lamp
ESP® OFF lamp

CAN Communication System Description

Refer to "CAN Communication System Description in Section 1A" for CAN communication system description. ESP®
control module communicates control data with each control module as follows.
ESP® Control Module Transmission Data
ESP® control
Transmit
module
5
1
3. ABS warning lamp
4. SLIP indicator lamp
If ABS has abnormality, the lamp turns "ON".
• If EBD system has abnormality, the lamp turns "ON".
• If bake fluid level in reservoir is lower than minimum level, the lamp turns "ON".
• Parking brake switch is ON, the lamp turns "ON".
If ESP® systems has abnormality, the lamp turns "ON".
• If stability control system and traction control system is active, the lamp blinks
at 5 Hz.
• If Steering angle sensor calibration is incompleted, the lamp blinks at 1 Hz.
• If ESP® OFF switch is turned "ON", the ESP® OFF lamp light up. When it is
"ON", TCS and stability control system functions are controlled not to work.
• ESP® OFF lamp light up to indicate that brake control of traction control
function is controlled not to act if brake pad temperature is over 320 °C (608 °F)
and any of wheel is in wheel spin condition.
Torque request signal
Wheel speed signal (front right)
Wheel speed signal (front left)
ESP® status signal
DATA
ABS active signal
ABS indication signal
EBD indication signal
Steering angle neutral position
2
4
3
5. ESP® OFF lamp
Condition and operation
Combination
ECM
meter
S7RS0B4601003
I6RS0B460002-01
S7RS0B4601004
Steering angle
sensor
I7RS0B460004-01