Panasonic KX-TDA50 Pc Programming Manual page 108

2.8 [1] Configuration
Default
830 ms
Value Range
630 ms, 830 ms, 1030 ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
None
Low Speed Pulse Dial—Pulse % Break
Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal
and make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
Low Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a low speed pulse dial. Low Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
60 ms
Value Range
4 × n (n=6–20) ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
108 PC Programming Manual