Panasonic KX-TDA50 Pc Programming Manual page 229

Recall—Call Park Recall
Specifies the length of time that a parked call waits to be retrieved, before the Transfer Recall
destination assigned to the extension that parked the call hears a Call Park Recall ring.
Default
60 s
Value Range
1–240 s
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
2.11.1 [4-1-1] Wired Extension—Extension Settings
2.11.10 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.3.5 Call Park
Recall—Disconnect after Recall
Specifies the length of time after an extension with a CO line call on hold receives a Hold Recall tone
that the held call is disconnected.
Default
30 min
Value Range
1–30 min
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.3.2 Call Hold
Tone Length—Busy Tone / DND Tone
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in
busy status or DND mode. A reorder tone will be sent when this timer expires. (For a call through
DISA, the call will be disconnected when this timer expires.)
Default
10 s
2.9 [2] System
PC Programming Manual 229