Panasonic KX-TDA50 Pc Programming Manual page 429

1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
For KX-TDA50/KX-TDA100/KX-TDA200:
Starting at 101
For KX-TDA600:
Starting at 1001
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent
extensions by adding one to the previous extension number.)
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.6 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Manual C. Waiting for Extension Call
Selects the method of receiving call waiting notification from other extensions.
2.11 [4] Extension
PC Programming Manual 429